Free Technical Advice
+44 (0) 1634 294 001

 

Laserchrom HPLC Equipment
 
Model LA2890 Solvent Recycler
 
  Buy This Solvent Recycler For :
 
  • Save up to 90% of mobile phase in isocratic mode
  • Compatible with any HPLC detector using an analogue output
  • Very fast payback time
  • Easy to Install
  • Very simple to operate
 
     
Features and Benefits   Specification
Works with isocratic HPLC systems, to recycle the eluent during any sections of flat baseline.   Signal Input Range
+/- 1V
Threshold level
0.1 - 99%
Redirection delay
0 - 99 seconds
Uses a peak threshold to monitor the detector analogue signal. When the signal goes out of the threshold range, flow is switched to waste.   Autozero
100% range
Switching valve
3 way zero dead volume, 1/4" - 28 fittings
Working pressure
Max 30psi (0.2MPa)
Has a built in time delay to allow a peak to clear the line before switching to recycling again.   Display
3 digit LED
Small and light   Inputs
Signal, autozero, waste
Output
Active Zero
Easy to connect - uses phono sockets, cables provided.   PC Communication
RS232 control software included
Power Input
120/240V 5VA adapter (included)
Other requirements
4 - 35oC, rel. humidity < 60%, non-condensing, max 30psi
    Dimensions
200 x 140 x 55mm (h x w x d)
    Weight
600g
     
Ordering Information 
LA2890 Solvent Recycler
LA2890/00